How to Fix Wall from Command Strips: Easy Steps to Repair and Restore Your Walls

Command strips are a popular choice for hanging lightweight items on walls without causing damage. However, removing them incorrectly or needing to reposition them can sometimes lead to wall damage. Here’s how you can fix your wall after using Command strips, ensuring it looks as good as new.

1. Assessing the Damage

1. Inspect the Wall: Carefully examine the area where the Command strip was attached. Look for any paint peeling, drywall damage, or residue left behind.

2. Gather Materials: You will need a few basic materials for the repair process:

   • Spackling paste or lightweight wall filler
   • Putty knife or scraper
   • Sandpaper (fine grit)
   • Paint and primer (matching the wall color)

2. Steps to Fix the Wall

1. Remove Residue: Start by gently removing any remaining adhesive residue from the wall surface using your fingers or a plastic scraper. Avoid using metal scrapers as they can scratch the paint.

2. Fill Holes or Gaps: If there are small holes or gaps left in the wall, use spackling paste or lightweight wall filler to fill them. Apply the filler with a putty knife, ensuring it is smooth and level with the wall surface.

3. Sand the Area: Once the filler is dry, lightly sand the repaired area with fine-grit sandpaper to smooth out any rough edges and blend it with the surrounding wall texture.

4. Prime and Paint: Apply a primer to the repaired area to ensure the paint adheres evenly. Once the primer is dry, paint over the repaired spot using the same paint color as the rest of the wall. Feather the paint outward to blend it seamlessly.

5. Let it Dry and Inspect: Allow the paint to dry completely according to the manufacturer's instructions. Once dry, inspect the repaired area to ensure it matches the surrounding wall and appears smooth and even.

3. Tips for Prevention

1. Follow Removal Instructions: Always follow the manufacturer's instructions when removing Command strips to minimize damage to the wall surface.

2. Test in a Small Area: Before applying Command strips to a large wall area, test them in a small, inconspicuous spot to ensure they adhere properly and can be removed without causing damage.

4. Conclusion

Fixing your wall from Command strip damage is a straightforward process that requires basic materials and careful attention to detail. By following these steps, you can repair small holes, remove adhesive residue, and restore your wall to its original condition. Remember to take precautions during removal and use appropriate repair techniques to maintain the integrity of your walls.